complete flashing but problem not solve,
whats wrong this problem,when i buscheck Invalid imei checksum.
here the log
MXKEY Serial: [MxKey HTI FLASHER INTERFACE 4] - C0854FCC
Using device: HTI BOX, FW ver: 00.07
Driver: FTDIBUS, ver: 2.4.16.0, NTMP ver: 2.6.2.0
Module ver: 1.0.0.16662(04-05-2011), Library ver: 1.0.0.9921(04-05-2011)
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0001 317E [AMD S29NS256P,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0006CA68
A3BDA66
ASIC type: 11
UEM Imei: 35631002451465
Flash Imei: 35639002459465
MasterCode: 4353143736
Invalid imei checksum !
Phone Type: RM-392 (Nokia 2680s-2)
SW Version: V 06.17 10-03-09 RM-392 (c) Nokia
Imei plain: 35639002459465-2
Product Code: 0564365
Cellular System: GSM
ASIC ID: 0x3162, type: 0
Ppm Id: EL
Language Pack:
- not available.
Imei net: 35639002459465
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN