[Edocomsel]

Originally Posted by gsmsikar

done the set only with the latest module v3.29 chinese miracle version ..
now i am checking the set if it is working ok for some time ..

thanks infinity team ..

==== [4/8/2011 12:12:58 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: can not read memory: 0FAA:S_FT_READBACK_FAIL
can not read memory, errorcode: 0FAA
it may be problem with current operation
error: last error: 0FAA:S_FT_READBACK_FAIL
Disconnect...
done
Finished, time used: 24 sec
Remove/Install battery now !

==== [4/8/2011 12:13:29 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
Disconnect...
done
Finished, time used: 1 min 4 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?

==== [4/8/2011 12:15:16 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 32Mb
number of areas/bytes to read: 1:02000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\InfinityBox\ChineseMiracle\SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005__firmware_20110408-122616.B4M.bin
Disconnect...
done
Finished, time used: 11 min 49 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?

==== [4/8/2011 12:27:14 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 128Mb
number of areas/bytes to read: 1:08000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\InfinityBox\ChineseMiracle\SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005__fullflash_20110408-130749.B4M.bin
Disconnect...
done
Finished, time used: 47 min 15 sec
Remove/Install battery now !
Action: "repair imei"
Model: Autodetect 6228-6268 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 353056755256968
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 352009026719356
verification Ok
Finished, time used: 17 sec
Remove/Install battery now !
Action: "repair imei"
Model: Autodetect 6228-6268 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-2: 353056416046568
imei write method: mode-1
imei write channel: imei #2 for dual sim/mono CPU
new imei-2: 353812001707299
verification Ok
Finished, time used: 2 sec
Remove/Install battery now !

Would you upload somewhere your backup ? I want that firmware ...

Thanks in advance