GSM-Forum - View Single Post - after flash (upgrade ) N82 white screen

Advance-Box · 06-22-2011, 09:52

@sky_finder

Follow this procedure step by step and you will have it working.

I assume you have FULL RPL backup since I see it in your logs... Anyway, let's begin!

1. Full Erase CMT 16 MB using ERASE Flash Function

2. Full Erase APE 256 MB usgin ERASE Flash Function

A shortcut for 1 and 2 is just to click the SCAN button inside the Erase Flash tab, then
put a check on the 2 flash chips found, then click ERASE.

3. Full Flash your phone using your latest 35.0.002 Firmware (MCU, PPM, CNT etc...)

* uncheck Backup Simlocks
* uncheck Backup RPL
* uncheck Factory Reset

--> Now Phone should be BLACK Screen, but scan phone works with 12345 imei...

4. Now Write this RPL File to your Phone:
C:\AdvanceBox Turbo Flasher\Nokia\backup\358984013759900\3589840137599 00_81913.rpl

5. Now Write this PM File to your Phone:
C:\AdvanceBox Turbo Flasher\Nokia\Backup\358984013759900\SL2_certifica te_V 06wk41v51 28-01-08 RM-313 (c) Nokia_358984013759900_Not Locked_81831.pm

*** You can also skip this write PM by just using Repair Simlocks (SL1 and SL2) function.

6. Now use "Stand Alone SX4" and write PM 1 and 309 from RM-320.pm

--> Now scan phone should show everything is ok, but phone should be BLANK Screen!

7. Now Flash one of the ENO file which I told you to download...
Flash 1 file only,, this file "rm313_ENO_x_2008wk06updv0.030.fpsx"

* uncheck Backup Simlocks
* uncheck Backup RPL
* uncheck Factory Reset

--> Now you will get "Test Mode" on screen

8. Now flash the second ENO file to the phone, file name:
"normalize_susd_eno_sharaku_urel.fpsx"

* uncheck Backup Simlocks
* uncheck Backup RPL
* uncheck Factory Reset

--> You will still get "Test Mode" on screen

9. Now Full Flash the phone again (MCU, PPM, CNT etc...)

* uncheck Backup Simlocks
* uncheck Backup RPL
* PUT A CHECK on Factory Reset

10. Now Phone SHOULD BE ok...

The Procedure above WORKS on ALL RAPIDOYAWE Based Phones (N95, N95 8GB, N82 etc...)

All you need is 2 ENO files and a full RPL Certificate Backup of the CMT and APE Subsystems.

06-22-2011, 09:52	#9 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@sky_finder Follow this procedure step by step and you will have it working. I assume you have FULL RPL backup since I see it in your logs... Anyway, let's begin! 1. Full Erase CMT 16 MB using ERASE Flash Function 2. Full Erase APE 256 MB usgin ERASE Flash Function A shortcut for 1 and 2 is just to click the SCAN button inside the Erase Flash tab, then put a check on the 2 flash chips found, then click ERASE. 3. Full Flash your phone using your latest 35.0.002 Firmware (MCU, PPM, CNT etc...) * uncheck Backup Simlocks * uncheck Backup RPL * uncheck Factory Reset --> Now Phone should be BLACK Screen, but scan phone works with 12345 imei... 4. Now Write this RPL File to your Phone: C:\AdvanceBox Turbo Flasher\Nokia\backup\358984013759900\3589840137599 00_81913.rpl 5. Now Write this PM File to your Phone: C:\AdvanceBox Turbo Flasher\Nokia\Backup\358984013759900\SL2_certifica te_V 06wk41v51 28-01-08 RM-313 (c) Nokia_358984013759900_Not Locked_81831.pm *** You can also skip this write PM by just using Repair Simlocks (SL1 and SL2) function. 6. Now use "Stand Alone SX4" and write PM 1 and 309 from RM-320.pm --> Now scan phone should show everything is ok, but phone should be BLANK Screen! 7. Now Flash one of the ENO file which I told you to download... Flash 1 file only,, this file "rm313_ENO_x_2008wk06updv0.030.fpsx" * uncheck Backup Simlocks * uncheck Backup RPL * uncheck Factory Reset --> Now you will get "Test Mode" on screen 8. Now flash the second ENO file to the phone, file name: "normalize_susd_eno_sharaku_urel.fpsx" * uncheck Backup Simlocks * uncheck Backup RPL * uncheck Factory Reset --> You will still get "Test Mode" on screen 9. Now Full Flash the phone again (MCU, PPM, CNT etc...) * uncheck Backup Simlocks * uncheck Backup RPL * PUT A CHECK on Factory Reset 10. Now Phone SHOULD BE ok... The Procedure above WORKS on ALL RAPIDOYAWE Based Phones (N95, N95 8GB, N82 etc...) All you need is 2 ENO files and a full RPL Certificate Backup of the CMT and APE Subsystems. Last edited by Advance-Box; 06-22-2011 at 09:58.