==== [21/06/2011 04:51:10 p.m.] ====
COM6 [VCP0] selected
module v3.95
Action: read unlock codes
unlock method: read codes
Model: UTStarcom-GTX212
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:6779:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: C1012_4.4_0x01208_CLARO_CA_NUMONYX
Version: CELLONSZ23C_09A_GEMINI_HW
====================
New firmware found (v.3.95, database date: 20.06.2011):
C1012_4.4_0x01208_CLARO_CA_NUMONYX
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
RapidShare AG, Cham, Switzerland or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
86 byte(s) read
imei: 35468904106138
connection Ok
193 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
181 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 84794315
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 22 sec
Remove/Install battery now !
i can read the unlock code, but when I put a sim card from another operator just says sim blocked, where I can get the flash eeprom