[german gsm team]

PHOENIX SERVICE SOFTWARE VERSION A14 2004.16.4.47

New Phoenix Service Software version A14 2004.16.4.47 has been released.

Supported phone models in package "A14" are: NHL-2*/4*/*6/*8/9*/10*/12*, NMM-1*/3*, NHM-1*/4*/7*/8*/10*, NEM-1*/2*/4*, NPE-4*, NPL-1*/2*/3*/4*/5*, NPM-6*/8*/9*/10*, RH-4*/6*/9*/12*/18*/19*/20*/23*/26*/28*/29*/30*/31*/33*/ 36*/37*/38*/47*/49*/50*/51*/52*, RA-2*/3*, TFE-4*, RM-1*/2*/4*/5*/17*/37*, HF-5* and RX-1*/16*.

Before installing this new Phoenix Service Software version A14 2004.16.4.47 it is mandatory to uninstall Phoenix versions A12 2003.50.7.36 or older.

Procedure:

1. Open Windows Control panel
2. Select "Add/Remove programs"
3. Select "Phoenix Service Software A"
4. Uninstall old Phoenix A12 or older
5. Install new Phoenix A14 2004.16.4.47

This procedure is necessary because A14 and newer Phoenix versions use new installation package compared to A12 and older.

Important notice for Winlock 4 users:

- Winlock 4 software v1.08.000 or older does not work with Phoenix A14 release.
- If you use Phoenix service software on the same computer as Winlock 4, please continue using Phoenix A12. Do not update Phoenix to version A13 or A14.

This Phoenix Service Software installation package includes following SW components:

- Phoenix Service Software
- DK2 Dongle Driver
- DKU-2 USB Driver
- FLS-4S Dongle Driver
- Flash Update files for FLS-4S and FPS-8*
- Faultlogger and Archive & Send programs for repair data reporting

During installation a Dongle must be attached to the parallel port of your computer and when installing Phoenix into WinNT 4.0, Win2000 or XP you must have admin rights locally.

For using the Phoenix in Win2000 or XP, user must have power user rights.

After installing Phoenix Service Software version A14 2004.16.4.47, please install latest product specific data package; do not use old data packages.

Changes/improvements made from A13 2004.08.5.42 to A14 2004.16.4.47:

- Support for RM-1 and RM-17 products added
- Flash Update Package 3.12.000 added
- Camera Control changes for RH-51/52 products
- Improvements to settings saving & restoring
- General settings configuration file updated for new product settings
- Possibility to detect used PA version added.
- Support for new prommers added for future use
- Modification to EM Calibration UI for new products
- FileManager2 - All files backup/restore now sorts all file system items (folders & files) in alphabetical order
- File selection changes to FPS-8 / FLS-4S UI
- Blackberry email supported in NVD.ini for RM-2 phones
- Phone information improved to show more than one sw module version for products which have two SW modules.
- Improvements to base level calculation in TX Power level tuning
- Smart card support added to installation for future use
- EDGE modulation selection in GSM TXIQUI Modified
- Improvements to manual EDGE TxPower Level Tuning
- Tx AGC tuning improvements for WCDMA / NMM-3 models
- Improvements to Bluetooth locals
- Support for Color scheme settings added to the Phoenix All settings
- Files hidden attribute bit is set when starting to write file from PC to the phone
- IMEI /ESN rebuild improvements for car phone models
- Band Information added to RH-37, RH-49 and RM-17 menu.
- Access key added into File System Format menu item.
- Some unnecessary testing menu´s removed
- Framework now automatically stores window positions.
- Layout of Login dialog updated.
- Improvements to connection handling logic
- Layout of Open Product dialog updated
- WCDMA Rf Control improvements to support new RF IC types
- During TxIQ tuning, also the VBAT value is tuned and saved
- Support for Operator specific logos for 2nd display added to UI settings
- FCI test component recognizes connected active covers correctly.
- Tab order in band information UI corrected and hourglass is shown when reading or writing data
- Improvements to user data saving / restoring and flashing when using USB connection
- Compass test improvements
- Display tune improvements
- Product detection improvements for Symbian products.
- BT information reading from product to Fault Log UI improved
- Stability improvements to File System Format UI
- Stability improvements to label printing
- Improvements to phonebook handling
- Poc Groups BackUp/Restore improvements, domain and password fields are removed. Empty PoC fields now handled correctly
- Improvements to GSM RF Controls UI
- Help files for RX Channel Select Filter Calibration updated, same help file for all types of RF engines.
- Timeout for self tests extended to prevent unnecessary errors
- Improvements to WLAN TX & RX Tests and WLAN TX Tuning, driver version is now informed correctly
- In WLAN Configuration UI data rate is shown correctly.
- Signal strength and quality values in WLAN Configuration are correct
- If calculation error occurs during manual EDGE power level tuning, the user can now adjust the values manually, procedure continues if DAC levels are adjusted to sensible order
- Java Email SMTP connection settings writing to phone improved
- Tuned WCDMA temperature Sensor calibration is now shown to the user correctly.

Known limitations/errors:

- Data package network use (Phoenix on local machine, data package on a shared network drive) not fully supported and therefore it should not be used.
- PKD-1 Dongle with 5 digit serial number does not work when it is connected to parallel port with the FPS-8* Flash Prommer. Phoenix does not recognize the dongle and Phoenix will not start. The solution is to change your dongle to a new one with 6 digit serial number.
- Default tuning channel change does not work
- BT Flasher indicator does not work on COM 2
- The parallel port in some IBM Netvista computers may cause problems when using the FLS-4S. This is because the rise time for the strobe is much longer than for any other pins of the port (problem has to do with the parallel port HW).
- Due to the modifications for network use (Phoenix on local machine, data package can be used from a shared network drive), installation of some phone specific data packages released during early September 2003 may cause incorrect operation. The most common symptoms are label printing and automatic flash file selection problems (files not found) because the local directory is written incorrectly by the data package. In these cases please be sure that the old Phoenix SW versions are uninstalled and try to re-install the new Phoenix service SW version A13.
- Winlock 4 SIM lock software does not work properly with Phoenix A14 (and A13) due to different framework.
- Automatic Tuning for WCDMA products does not work in this release, previous Phoenix release should be used if autotuning for WCDMA models is needed.

Needed equipment for software update:

- Phoenix Service Software version A14 2004.16.4.47 (or later), which includes all needed drivers and flash support files
- Latest phone model specific Product Data Package
- Flash Update package for FPS-8/FLS-4 (v 3.12.000 included in Phoenix A14 package)
- JBV-1 Software update version 18 (or later)
- PKD-1 Dongle & Activated Flash Prommer FPS-8 or
- FLS-4S POS Flash Dongle
- Product specific service tools

Note:
- A complete Phoenix service SW installation package will always include the latest available drivers and flash update files
- Please use separate driver of flash support file installation packages only, if updates occur between complete Phoenix releases