I make Read codes, and not give me one:
Code:
Selected model: C3300K
Selected com port: COM10
Selected speed port: 115200
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Phone master IMEI -> 35334004511232
Phone SW -> C3300KXXJGD
Langpack-> Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Phone HW -> MP 0.801
Phone BT ADDR -> F49F-54-A99FEC
[FREEZE LOCK]:
[NET LOCK]:
[SIM LOCK]:
[PHONE LOCK]:
[SP LOCK]:
Read Info - ok
Elapsed time: 34 second, sw ver: 3.5.0020
Then I make direct unlock, he say that is unlocked, but is not.
I also make full reset, and after make this: #7465625*638*00000000#
but report me that is wrong code.
What is problem with C3300k?
Please suport, tell me!
Thanks
Code:
Selected model: C3300K
Selected com port: COM10
Selected speed port: 115200
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Unlock block
Unlock block
Erasing... OK
Sending... OK
Unlock - ok
If lock - not deactivate: Please make full reset *2767*3855# + input code #7465625*638*00000000#
Elapsed time: 90 second, sw ver: 3.5.0020