registered to: saeedullah_khan
Connect phone on selected interface...
Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102054100
CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 29B0021217520049C1536168A0862C90CC03A10C
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Reading certificates...
Reading NPC certificate...
IMEI : 354345042684804
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
ADL: Reading certificates done!
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...
SL3 Simlock read ... ok
WMDRM read ... ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
RPL saved : D:\infinity box\InfinityBox_install_BEST_v1.23\Backup\Cert\354 345042684804_2nd.rpl
All done, Disconnecting
Elapsed: 00:00:18
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, ver:1.04 , Infinity Team (c) 2011
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok
Uploading RF/Battery tune to phone...
Using : RM-638.pm
Operating mode is OK, no need change...
Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 21 write - Ok
Record 29 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok
Check ST_SECURITY now...
Security status : ST_SECURITY => OK
Done!
Elapsed: 00:00:00
Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone detected
Done!
Checking Camera Configuration...
Operating mode is OK, no need change...
CAM1 HW : NI00IIIIRR030C20C607
CAM1 SW ver : 003003
Updating Camera #1 Configuration...
Upload done, checking...
CAM1 SW ver : 003003
Configuration Ok!
Secondary Camera #2 configuration info not exist
Done!