Procedure is as follows:
1. Connect phone with GW300 COM cable as GS500g
2. Repair EEPROM (now phone should turn on with YELLOW SCREEN)
3. Repair IMEI with GW300 COM cable
3. Flash it with any KM555e firmware. Phone working and unlocked!!!
Code:
Software version : LGI_1_93SD.exe
----------------------------------------------------------
Port COM11 connected
Port COM11 connected
Connect phone to cable-phone must be ON, if
phone can't be powered connect it OFF and
press Power ON and keep it pressed until
bootloader will start ...
Aborted by user
Connect phone to cable-phone must be ON, if
phone can't be powered connect it OFF and
press Power ON and keep it pressed until
bootloader will start ...
bootloader will start ... OK
----------------------------------------------------------
Loading primary loader ...
Loading primary loader ... OK
Loading secondary loader ...
Loading secondary loader ... OK
Changing baudrate ...
Changing baudrate ... OK
Setting bus ...
Setting bus ... OK
Loading certificate ...
Loading certificate ... OK
----------------------------------------------------------
Reading phone info ...
----------------------------------------------------------
Phone type : LG-GS500g
Phone IMEI : 012508-00-034594-0
Reading phone info ... OK
----------------------------------------------------------
Repairing phone ...
Making backup file :
Reading calibration data area ...
Reading calibration data area ... OK
Saving flash ...
Saving flash ... OK
Backup saved to file :
LG-GS500g__012508000345940_cal_bkp.crf
Reading eeprom area ...
Reading eeprom area ... OK
Saving flash ...
Saving flash ... OK
Backup saved to file :
LG-GS500g__012508000345940_eep_bkp.crf
Writing eeprom area ...
Writing eeprom area ... OK
Writing calibration area ...
Writing calibration area ... OK
======== Process completed ========
Operation time - 00:15
----------------------------------------------------------
For operation finishing,do next :
- power phone ON - keep ON button for
- 30-40 seconds
- restore original IMEI with "Read IMEI"
- and "Write IMEI" functions
- if you have one color LCD - flash phone
----------------------------------------------------------
Writing IMEI ...
Writing IMEI ... OK
======== Process completed ========
Operation time - 00:08
----------------------------------------------------------
For operation finishing,do next :
- check with *#06# phone IMEI
- if IMEI was not repaired - do next :
- make "DIRECT UNLOCK"
- or make "ENABLE WRITE IMEI"
- or make "REPAIR EEPROM"
- and repeat IMEI writing again
Connecting phone - connect USB cable to phone,
phone must be OFF and without battery ...
Operation failed
Connecting phone - connect USB cable to phone,
phone must be OFF and without battery ...
Driver connected, connecting phone ...
Driver connected, connecting phone ... OK
----------------------------------------------------------
Changing baudrate ...
Changing baudrate ... OK
Setting bus ...
Setting bus ... OK
----------------------------------------------------------
Writing flash from file :
KM555eAT-00-V10b-515-XXX-APR-20-2010_EN_
FR_GER_IT_ES_INDON_MALAY_THAI_VIET_CN_
RU_UKR_KZ_LV_LT_EE_RO_KOR.bin
----------------------------------------------------------
Checking flash file ...
Checking flash file ... OK
Extracting flash files ...
Extracting flash files ... OK
Writing flash ...
Writing flash ... OK
Phone initialization, please wait ...
Phone initialization, please wait ... OK
======== Process completed ========
Operation time - 0:06:39