08-08-2011, 12:02
|
#10 (permalink)
|
Freak Poster
Join Date: Jul 2003
Posts: 232
Member: 33954
Status: Offline
Thanks Meter: 10 | same problem here any help is welcome Quote:
Originally Posted by Steamroller so far I try to flash it several times including flash with ENO file or USB flashing with cyclone and mxkey
phone was v30.0.3 when it came to me but I can't find sw with same product code v30.0.0 or 31.0.4 so I reflash it with 30.0.3 , same problem . Then I try 31.0.4 , nothnig new...
then ENO , nothing new
then USB , nothnig new
Checked BSI - is OK
Checked + Lines - all ok
Try other batteryes - nothnig new
Checked current consumption when power up - seems to be the same as a good working set
PCB is looking good , no wather damage , no torsion , set looks as new...
try to remove camera like some peoples say on this forum - still only vibrate
try other LCD like some peoples say on this forum - still only vibrate
try to power up only with lcd connected - still only vibrate
the set is able to enter TEST or LOCAL mode only with box , flash seems to be ok , no error
the set won't power up when charger is inserted
at power up it vibrate BUT it won't vibrate if i try power up again untill I remove and reinsert battery ! (I tryed with a good one to isolate BSI and it vibrate every time I press power on so I eliminate BSI problem like that)
now... if someone has an answer to this problem is welcome to help !
here is the log : first one is info and shows actual status of the phone
and second is more complete and shows initial status , flashing logs more status etc | i have same problem here any solution my phone power on with light after vibra but after few seconds turn off |
| |