[M0YAL]

[9/7/2011 3:21:04 PM] Open serial port...OK
[9/7/2011 3:21:04 PM] Connecting to the RIFF Box...OK
[9/7/2011 3:21:04 PM] Firmware Version: 1.26, JTAG Manager Version: 1.35
[9/7/2011 3:21:04 PM] Selected Resurrector: [Huawei C5005]
[9/7/2011 3:21:04 PM]
[9/7/2011 3:21:04 PM] Connecting to the dead body...OK
[9/7/2011 3:21:04 PM] Detected dead body ID: 0x220B30E1 - CORRECT!
[9/7/2011 3:21:04 PM] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[9/7/2011 3:21:04 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[9/7/2011 3:21:04 PM] Settings Code: 0x0000010000800000000000000034
[9/7/2011 3:21:04 PM]
[9/7/2011 3:21:04 PM] Resurrection sequence started.
[9/7/2011 3:21:04 PM] Establish communication with the phone...OK
[9/7/2011 3:21:04 PM] Initializing internal hardware configuration...OK
[9/7/2011 3:21:04 PM] Uploading resurrector data into memory...OK
[9/7/2011 3:21:04 PM] Starting communication with resurrector...OK
[9/7/2011 3:21:04 PM]
[9/7/2011 3:21:04 PM] Detected an Initialized FLASH1 Chip, ID: 0x017E/0x2231 (16MB)
[9/7/2011 3:21:04 PM]
[9/7/2011 3:21:04 PM] Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF
[9/7/2011 3:21:04 PM] Completed in 00:08:26.703 (Average Transfer Rate: 32.33 kB/s)
[9/7/2011 3:21:04 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]