Welcome to use McnBox!
Selected COM5
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN20110223xxxxx
Firmware V1.12
Checksum ED44-DCBE
Box Connected!
Ready working at COM5
Scanning pin status,please waiting...
->.............................
Pin-status Scan Done
Scanning,waiting...
->=........
Operation done, Pin detect out.
BOOT : 3 USB D-: 6 USB D+: 4 Mstar MSW853X
Total expend 19 seconds
[G:2 D-:6 D+:4 Up:3] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Connect Ok.
Initialize boot...
Boot3 Error, Id: 3003
Welcome to use McnBox!
Selected COM5
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN20110223D1262
Firmware V1.12
Checksum ED44-DCBE
Box Connected!
Ready working at COM5
Scanning pin status,please waiting...
->.............................
Pin-status Scan Done
Scanning,waiting...
->=........
Operation done, Pin detect out.
BOOT : 3 USB D-: 6 USB D+: 4 Mstar MSW853X
Total expend 19 seconds
[G:2 D-:6 D+:4 Up:3] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Connect Ok.
Initialize boot...
Boot3 Error, Id: 3003
Connecting, wait...
Connect Ok.
Initialize boot...
Boot1 Error, Id: 1000
I hope next update can complete MCN mstar cpu. If MCN able to read flash, write flash and cpu format mstar perfectly. MCN is the best tool for china phone 2011
. Because in the other box while this can only be to read the flash but it's hard to write flash cpu mstar
B.R
Toto