COM6 [VCP0] selected
module v3.95
Action: read unlock codes
unlock method: read codes
Model: ZTE-R221_16mb
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:557C:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: BG-MTEL-R9SM-P109A17V1.0.0B01
Version: ZTENJ23D_09A_HW
====================
New firmware found (v.3.95, database date: 20.06.2011):
BG-MTEL-R9SM-P109A17V1.0.0B01
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
RapidShare – Secure Data Logistics or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
86 byte(s) read
imei: 86853300403516
connection Ok
192 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
180 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 333996275381
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 21 sec
Remove/Install battery now !