registered to: saeedullah_khan
Connect phone on selected interface...
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RX-51 , HWRev : 2204
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2.004_PR_004
Device mode : Production mode
Read info Ok
Check : Processing ADC5AE0E_RX-51_2009SE_3.2010.02-8.003_PR_F5_003_ARM.bin
BLK_INF : kernel
BLK_VER : 2.6.28-20094803.3+0m5
==========
BLK_INF : rootfs
BLK_VER : RX-51_2009SE_3.2010.02-8.003_PR_003
==========
BLK_INF : cmt-2nd
BLK_VER : BB5_09.36
==========
BLK_INF : cmt-algo
BLK_VER : BB5_09.36
==========
BLK_INF : cmt-mcusw
BLK_VER : rx51_ICPR82_09w47
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.4.4+0m5
==========
BLK_INF : xloader
BLK_VER : 1.4.14.4.4+0m5
==========
BLK_INF : secondary
BLK_VER : 1.4.14.4.4+0m5
==========
Check : File Is Ok !
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Maemo Phone not found
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Maemo Phone not found
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Maemo Phone not found
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RX-51 , HWRev : 2204
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2.004_PR_004
Device mode : Production mode
Read info Ok
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RX-51 , HWRev : 2204
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2.004_PR_004
Device mode : Production mode
Read info Ok
Processing NOL part
File : ADC5AE0E_RX-51_2009SE_3.2010.02-8.003_PR_F5_003_ARM.bin
NOL Part program error!
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RX-51 , HWRev : 2204
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2.004_PR_004
Device mode : Production mode
Read info Ok
Processing APE part
File : ADC5AE0E_RX-51_2009SE_3.2010.02-8.003_PR_F5_003_ARM.bin
Processing : kernel , 2.6.28-20094803.3+0m5
Kernel flash Ok
Processing APE part
File : ADC5AE0E_RX-51_2009SE_3.2010.02-8.003_PR_F5_003_ARM.bin
Processing : rootfs , RX-51_2009SE_3.2010.02-8.003_PR_003
RootFs flash Ok
Processing CMT part
File : ADC5AE0E_RX-51_2009SE_3.2010.02-8.003_PR_F5_003_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_09w47
CMT part prepare Ok, files are sent
Program CMT request Ok
Switch : OSSO UART+USB
Version : RX-51_2009SE_3.2010.02-8.003_PR_003
Switch CMT request Ok
CMT : Erasing...
CMT : Program...
CMT : Program Finished!
Executing PostFlash : RX-51_2009SE_3.2010.02-8.003_PR_003
Executing PostFlash : Reset RD Flags
Executing PostFlash : Reboot
Done!
Elapsed: 00:01:39
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...