registered to: saeedullah_khan
Connect phone on selected interface...
Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 16800102EC800052A1C01B6F4AFD63B3BCDAD328
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.24.0
Processing RAWLOADER...
FLIC : 005800EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.24.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : C49131EB98702B6A39D7F285B1FF2D9BE1D6F863
CFL : RAPIDO Mode - FLASH CRT (NPC/CCC/HWC...) can't be readed
CFL: Close_Session
Content: 000300000000030000000300000000
CFL: Reboot
Wait, reconneting...
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
CRT308 Backup Created
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
RPL saved : D:\InfinityBox_install_BEST_v1.29\Backup\Cert\3569 18030451598_SIM.rpl
All done, Disconnecting
Elapsed: 00:00:25
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15
Done!
Format File System...
Operating mode is OK, no need change...
Scanning FS parametres...
Checking Data...
Detected : 2 drive(s)...
Start formating....
Using Series 60 format algorithm...
==================================
Formating drive : C now...
Step1 : OK
Step2 : OK
End format...
==================================
Formating drive : D now...
Step1 : OK
Step2 : OK
End format...
==================================
Done!
Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:08
Reading Phone Info....
Connected phone - Nokia N97 mini
Software ver : V ICPR72_09w28.6 09-09-09 RM-555 (c) Nokia
IMEI : 356918030451598
Ape Ver : v 10.0.020
APE Var : v 10.0.02010.0.020.01.0110.0.020.209.02
APE ADSP: 256
DSP Ver : ICPR72_09w26
APE Test: rm555ENO_09w24v0.040
PPM :
CNT : RM555_014_000_M001
Product SN : C8B747983
Product code : 0591466
Base Prd.code: 0580176
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 5412
Retu : 16
Tahvo : 22
Batery: 3980 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 356918030451598
IMEI spNet : 3A 65 19 08 03 54 51 09
IMEI svNet : 33 65 19 08 03 54 51 09 F1
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
User code : Crypted
UserDataExLevel : Low [Gallery]
Done!