Dear legija
I used tab belong:
- Switch to "DCC Read/Write" TAB
- Select "Access ROM1 Address Space"
- Check "Auto Fullflash size"
- Click "Read Memory"
- When reading is finished, click "Save"
but
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [MSM7227 L41 D08 OneNAND]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0000010010000000000000000027
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
WARNING: Resuming interrupted read from 0x0000218000, yet to read - 0x001FDE8000...
Reading FLASH1 address space from 0x0000218000 to 0x001FFFFFFF
Failed to receive answer to READ command.
|
Chosse samsung S5570 fail
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung S5570]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - WRONG!!!
ERROR: Current ID does not belong to the Samsung S5570 family.
|
Thx all!