imei write ok in mtk 6253 my infinity box.. other china box fail
micromax x265 mtk 6253
==== C:\InfinityBox\MModule\MModule.exe [22/12/2011 1:56:39 PM] ====
Infinity-Box - Multibrand Unlock & Repair Tools
sales department:
[email protected]
support forum:
Infinity-Box - GSM-Forum
Loading data, wait...
[Infinity Box] MModule v4.11
smart-card: connected
S/N: 3xx6:0116
Wait...
Device: _Autodetect MT6205-6239 NOR
Initialization done
COM7 ready
Action: read/check information
Model: _Autodetect MT6205-6239 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6253, E02
Hardware version: GIONEE53_09B_SLIM_HW
Software version: 1000C_0101_V1825"
Software date: 2000.00.00
Barcode: MT012345678901234567
imei-1: "
imei-2: "
imei-3: "
Finished, time used: 6 sec
Remove/Install battery now !
Imei 91056940189877 already was repaired: 21/12/2011-10:05:52 PM
Continue with this imei ?
Action: "repair imei"
Model: _Autodetect MT6205-6239 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: "
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 910569401898773
verification Ok
Finished, time used: 2 sec
Remove/Install battery now !
Action: "repair imei"
Model: _Autodetect MT6205-6239 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-2: "
imei write method: mode-1
imei write channel: imei #2 for dual sim/mono CPU
new imei-2: 910569406898778
verification Ok
Finished, time used: 2 sec
Remove/Install battery now !
Action: read/check information
Model: _Autodetect MT6205-6239 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6253, E02
Hardware version: GIONEE53_09B_SLIM_HW
Software version: 1000C_0101_V1825"
Software date: 2000.00.00
Barcode: MT012345678901234567
imei-1: 910569401898773
imei-2: 910569406898778
imei-3: 910569401898773
Finished, time used: 2 sec
Remove/Install battery now !