GSM-Forum - View Single Post - Successfully unlocked/repaired phones by Infinity-Box

.:B-A-G:. · 12-23-2011, 11:03

COM3 [VCP0] selected
module v4.12
Action: "user code"
unlock method: smart fast
Model: SFR-115
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:42AD:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: EFS-SFR-R9SM-P109A17V1.0.4B03
Version: ZTENJ23D_09A_HW
86 byte(s) read
imei: 3xxxxxxxxxxxxx
connection Ok
192 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
user code set to: 0000
Finished, time used: 11 sec
Remove/Install battery now !

12-23-2011, 11:03	#15052 (permalink)
.:B-A-G:. No Life Poster Join Date: Mar 2010 Location: djerba Posts: 690 Member: 1269161 Status: Offline Thanks Meter: 119	sfr 115 unlocked COM3 [VCP0] selected module v4.12 Action: "user code" unlock method: smart fast Model: SFR-115 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6223:8A08]... CPU: MT6223 high speed boot On chip: 0011:42AD:000C status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6223,E08 Date: 2000.00.00 Version: 1.0 Version: EFS-SFR-R9SM-P109A17V1.0.4B03 Version: ZTENJ23D_09A_HW 86 byte(s) read imei: 3xxxxxxxxxxxxx connection Ok 192 byte(s) read reading data... reading data #2... building new data... writing data... user code set to: 0000 Finished, time used: 11 sec Remove/Install battery now !