N9 (64gb version) flashing - BIN+eMMC with wipe.
9 minutes for all
Code:
Rebooting...
Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RM-696 , HWRev : 1501
NOLO : 01/05/21
SWVer: DFL61_HARMATTAN_20.2011.40-4_PR_001
Device mode : Production mode
Read info Ok
Processing APE Boot...
File : DFL61_HARMATTAN_20.2011.40-4_PR_LEGACY_001-OEM1-958_ARM..bin
Processing : ape-algo
APE Algorithm boot Ok
Reopening the connection...
RFS mode init Ok
Device : RM-696
HW build : 1501
Bat.level : 91
SW release : (empty)
Protocol : 108
UPDAPP ver : 1.6.3
Upd/Dev PT : 3 , 3
FL_images : cert-sw,xloader,secondary,rootfs,kernel,moslo,config,mmc,tar,cmt-2nd,cmt-algo,cmt-mcusw
Last errors : bb5_rdc_cert_read failed
Code Match Ok
HW match Ok
RFS : Performing FULL WIPE...
Starting Wipe...
Bat.level : 91
Battery voltage is enough, starting wipe...
Formatting... Can take up to 15 minutes, wait until process complete
Stage #1 : Swap format Ok
RFS : No any errors
Stage #2 : eMMC format Ok
RFS : No any errors
RFS Set : Host Protocol set to 108
RFS Set : CMT Verify On
RFS Set : Perform RFS On
RFS Set : eMMC preserve Off
---Processing MCU image---
Processing File : DFL61_HARMATTAN_20.2011.40-4_PR_LEGACY_001-OEM1-958_ARM..bin
RFS : Sending config for [cert-sw]
-> Ver T : RM-696
-> Ver H : 1501 , 1502
RFS : Init pipe 00
RFS : Flashing...
RFS : Finalizing...
cert-sw Flash done
RFS : Sending config for [kernel]
-> Ver I : 2.6.32-20113701.10+0m6
RFS : Init pipe 01
RFS : Flashing...
RFS : Finalizing...
kernel Flash done
RFS : Sending config for [rootfs]
-> Ver I : DFL61_HARMATTAN_20.2011.40-4_PR_001
RFS : Init pipe 02
RFS : Flashing...
RFS : Finalizing...
rootfs Flash done
RFS : Sending config for [cmt-2nd]
-> Ver T : RM-696
RFS : Init pipe 03
RFS : Flashing...
RFS : Finalizing...
cmt-2nd Flash done
RFS : Sending config for [cmt-algo]
-> Ver T : RM-696
RFS : Init pipe 04
RFS : Flashing...
RFS : Finalizing...
cmt-algo Flash done
RFS : Sending config for [cmt-mcusw]
-> Ver I : 9.2.2011.21
-> Ver T : RM-696
RFS : Init pipe 05
RFS : Flashing...
RFS : Finalizing...
cmt-mcusw Flash done
RFS : Sending config for [xloader]
-> Ver I : 2.1.5+0m6
-> Ver T : RM-696
-> Ver H : 1501 , 1502
RFS : Init pipe 06
RFS : Flashing...
RFS : Finalizing...
xloader Flash done
RFS : Sending config for [secondary]
-> Ver I : 2.1.5+0m6
-> Ver T : RM-696
-> Ver H : 1501 , 1502
RFS : Init pipe 07
RFS : Flashing...
RFS : Finalizing...
secondary Flash done
---Processing eMMC image---
Processing File : DFL61_HARMATTAN_20.2011.40-4.EURASIA_EMMC_EURASIA.bin
RFS : Sending config for [mmc]
-> Ver I : DFL61_HARMATTAN_20.2011.40-4.EURASIA
RFS : Init pipe 08
RFS : Flashing...
RFS : Finalizing...
mmc Flash done
Done!
Elapsed: 00:09:47
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok