Quote:
Originally Posted by tharejamohit msm6125 cpu how to connect with direct memory plugin need help i try but showing error
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.29, JTAG Manager Version: 1.38
Selected Target: [MSM6125, 2.60V, TAP0]
Connecting to the MSM6125 target...OK
Detected dead body ID: 0x120FC0E1 - IGNORED!
Set I/O Voltage reads as 2.62V, TCK Frequency is 4 MHz
Resetting and Halting target...OK
R0 = 0x00000000 R6 = 0x00000000 R12 = 0x00000000
R1 = 0x00000000 R7 = 0x00000000 R13 = 0x00000000
R2 = 0x00000000 R8 = 0xFFFFFFFF R14 = 0x00000000
R3 = 0x00000018 R9 = 0xFFFFFFFF R15 = 0xFFFFFFE8
R4 = 0x00000000 R10 = 0x00000001 CPSR = 0x00000000
R5 = 0x0000001E R11 = 0x00000000
Connecting to MCU's NAND Memory Controller...FAILED
ERROR: Read/Write memory failed during H/W Init. |
This error usually means that NRST pin is not connected. Check Your pinout !.