View Single Post
Old 01-08-2012, 18:21   #4 (permalink)
CROGsm
Freak Poster
 
CROGsm's Avatar
 
Join Date: Dec 2011
Posts: 185
Member: 1706330
Status: Offline
Thanks Meter: 96
my log:

urn-on the Phone Goto 'Settings > Application > Development'
And Check 'Usb Deb***ing' Then Connect Usb Cable To Phone And Install Needed Driver.
------------------------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Root Procedure Started!
Refreshing ... OK
Prepairing ROOTFILE1(STEP 1) ... OK
Prepairing ROOTFILE1(STEP 2) ... OK
Prepairing ROOTFILE1(STEP 3) (Please Be Patient 'its take almost ~190 Sec')... OK

Reconnecting Device ...
------------------------------------------------------------------------------------------------
if Procedure Stuck Here For a Long Time try This:
Disconnecting USB Cable From Phone then Go to:
'Settings > Application > Development' and Toggle 'USB Deb***ing' (Uncheck then Check)
Then Connect Cable to Phone
------------------------------------------------------------------------------------------------

Device Found!
Prepairing ROOTFILE2(STEP 1) ... OK
Prepairing ROOTFILE2(STEP 2) ... OK
Prepairing ROOTFILE2(STEP 3) ... OK
Prepairing ROOTFILE2(STEP 4) ... OK
Prepairing ROOTFILE2(STEP 5) ... OK
Prepairing ROOTFILE2(STEP 6) ... OK
Prepairing ROOTFILE2(STEP 7) ... OK OK

Prepairing ROOTFILE3(STEP 1) ... OK
Prepairing ROOTFILE3(STEP 2) ... OK
Prepairing ROOTFILE3(STEP 3) ... OK
Prepairing ROOTFILE3(STEP 4) ... OK OK

Prepairing Final Step ... OK
Refreshing ... OK
Rebooting ... OK
Root Procedure Finished!
Operation Completed
Operation Time: 00:02:48


Steps:

Enable USB DBG.
On ADB select ROOT.
Click DO IT!
Connect phone and install drivers if asked
 
 
Page generated in 0.07538 seconds with 7 queries