GSM-Forum - View Single Post

javeed_aminy · 02-20-2012, 07:04

Loading module , please wait...
PMB8877 Module 2.0 started. SW: Ver 3.6.0.0
Connecting to LG KP500 in UART Mode (COM3 ,921600)
Phone found! (MCU:PMB8877) prebooting...
Release power button. Booting...
Reading info...
Flash ID: 0xA4FF
Phone Not Respond , Possible reason batery Discharge!
If you shure that battery ok Change baudrate
BOOT Failed
Disconnected.
TIP: Please reconnect phone battery / power source.

i changed battry and baudrate but not solved??

this is first time that i am going to flash lg with z3x???

any suggestion??

02-20-2012, 07:04	#1 (permalink)
javeed_aminy No Life Poster Join Date: Apr 2010 Posts: 558 Member: 1276771 Status: Offline Thanks Meter: 33	how to flash lg kp500???? Loading module , please wait... PMB8877 Module 2.0 started. SW: Ver 3.6.0.0 Connecting to LG KP500 in UART Mode (COM3 ,921600) Phone found! (MCU:PMB8877) prebooting... Release power button. Booting... Reading info... Flash ID: 0xA4FF Phone Not Respond , Possible reason batery Discharge! If you shure that battery ok Change baudrate BOOT Failed Disconnected. TIP: Please reconnect phone battery / power source. i changed battry and baudrate but not solved?? this is first time that i am going to flash lg with z3x??? any suggestion??