[gbluez]

MXKEY [MxKey Team HTI PLUS Flasher Interface 0], SN: C06029FF
Using device: HTI, FW ver: 00.50, SN: 01001E28
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
 SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 88C0 [ST M58MWR064FU,64 Mbits] page size: 64 K type: NOR area: 01000000-017FFFFF
FlashID1: 0000 0001 [unused/removed] 
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514 
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00F148FDA3BDA66
ASIC type: 11
UEM Imei: 35419803387532
Flash Imei: 35419803387532
MasterCode: 6453014315
RPL saved to "C:\mobileEx\3.5\data\backup\35419803387532_1330454445_BACK.rpl" 

Phone type: RH-122 
SW version: V 03.10 11-02-09 RH-122 (c) Nokia 
Imei plain: 35419803387532-3
Product code: 0575925
Cellular system: GSM
ASIC ID: 0x2293, type: 11
Ppm Id: MD
Language Pack:
English,Filipino,Vietnamase

Master code: 1765353362
 
Imei net: 35419803387532
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

there is no such bug. check FBUS cable, check USB cable for HTI, check HTI chip damaged or not, some info about HTI boot error