Registered User
Join Date: Jan 2008 Location: ..:: Limra ::.. Mobile's .
Posts: 238
Member: 680336
Status: Offline
Thanks Meter: 44 | C1-01 Successfully Flashed With Usb With Letest Ver. Set Is Ded Onely White Disply And Off Flashed With Rpl Backup Also
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: xxxxxxx
Using device: USB ROM and HTI, FW ver: 00.50, SN: xxxxxxx
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.75
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35702104142091
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35702104142091_ back.RPL"
Processing file: rm607__06.15.mcusw
Downloading item CODE:rm607__06.15.mcusw_ebl_psi.fls, num block: 5, size: 25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.360 s
Erasing area 0x40040000-0x4007FFFE ...OK
Programming completed in 0.500 s
Erasing area 0x40080000-0x4009FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x400A0000-0x4019FFFE ...OK
Programming completed in 1.437 s
Erasing area 0x40400000-0x41B7FFFE ...OK
Programming completed in 30.860 s
Checksum verified (0x49A2)
Processing file: rm607__06.15.ppm_a
Downloading item CUSTackage_a.ppm_ebl_psi.fls, num block: 1, size: 3.54 MB
Erasing area 0x41C00000-0x41F88D16 ...OK
Programming completed in 4.859 s
Checksum verified (0xDF49)
Processing file: rm607__06.15.image_a_0595346
Downloading item CUSTackage_a_0595346.image.fls, num block: 1, size: 11.38 MB
Erasing area 0x42200000-0x43E5FFFE ...OK
Programming completed in 16.390 s
Checksum verified (0xAD17)
Total time for flashing process(boot+erase+write) was 7 min 35.828 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C1-01 USB Phonet, PORT_ID: 325DF844
Verifying communication to device OK.
After Flash Processing ...
Reseting Factory Values OK.
Phone type: RM-607 (C1-01)
SW version: V 06.15 25-11-11 RM-607 (c) Nokia
Imei plain: 35702104142091-5
Product code: 0596369
Language Pack:
- not available.
SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: NI00CS00000401022E05, ver: 001.004
Imei net: 35702104142091
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN |