To connect GT-S8530 phone you have to perform the following steps:
1. Go to dial window.
2. Enter "*#197328640#" number.
3. Make next steps: select Common->Service configuration->Data
service confing->USB ACM AP.
4. Restart phone.
5. Press "Read Info" in Octopus Samsung software.
Selected firmware file: S8530DXKB1_OLBKB1.oct
Please put your phone in download mode and connect to PC.
To put GT-S8530 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume+" +"Camera"+"Power" buttons.
Searching for phone. Please wait...
Found phone on COM57
Firmware write started.
Writing BOOT\BOOT_LOADER section...
Writing BOOT\DBL section...
Phone will restart now. Please don't disconnect cable!
Writing AMSS section...
AMSS section has been written successfully.
Writing APPS section...
Writing Firmware Failed
Please put your phone in download mode and connect to PC.
To put GT-S8530 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume+" +"Camera"+"Power" buttons.
Searching for phone. Please wait...
Found phone on COM57
Firmware write started.
Writing BOOT\BOOT_LOADER section...
Writing BOOT\DBL section...
Phone will restart now. Please don't disconnect cable!
Writing AMSS section...
AMSS section has been written successfully.
Writing APPS section...
Writing Firmware Failed
Access violation at address 00000000. Read of address 00000000