GSM-Forum - View Single Post

sriharigold · 05-19-2012, 00:09

BUS CHECK report :

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C0854874
Using device: HTI, FW ver: 00.50, SN: 00002F4F
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1E700001F29E00528C772B2C56494F5FC5BE2655
ASIC MODE ID: 00
ROOT KEY HASH: C70CB07324056BC66A824347F40DB2D5
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.50.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.50.0 revision: 2.0 size: 0x8B45D
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Original Imei: 35339704926917
Original Product code: 0592129
Bluetooth ID: E0A6702DF531
SIMLOCK PA identifier:
[0] PA_SL2
[1] PA_SL3
Phone type: RM-437 (Nokia E63)
SW version: V ICPR71_09w47.11 14-02-11 RM-437 (c) Nokia
Imei plain: 35339704926917-1
Product code: 0568890
Battery voltage: 4878 mV, current: 48 mA
Language Pack:
- not available.

SLPA ver[2]: PA_SL2 (15 digit NCK)

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SECURITY_TEST passed

SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

Simlock/unlock by code Report:

SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
Backup already exist.
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C0854874
Using device: HTI, FW ver: 00.50, SN: 00002F4F
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)

Phone type: RM-437 (Nokia E63)
SW version: V ICPR71_09w47.11 14-02-11 RM-437 (c) Nokia
ApeCoreSw: 510.21.010

Using cached productData.
PUBLIC ID: 1E700001F29E00528C772B2C56494F5FC5BE2655
PRIVATE ID: 9CDA8A05F3D34211A7BEF5545DF7950010DD3345

#pw+ 228989176665992 +1 #
#pw+ 245495915041360 +2 #
#pw+ 613444246987718 +3 #
#pw+ 011592630632757 +4 #
#pw+ 775605730295371 +5 #
#pw+ 750149392366998 +6 #
#pw+ 989059933218887 +7 #

Sending NCK code ...
Trying mode: FBUS, NCK lock 7(ALL) ...FAILED: not ready
Trying mode: FBUS, NCK lock 6(MCCMNC+GID1+GID2) ...FAILED: not ready
Trying mode: FBUS, NCK lock 5(MCCMNC+GID1) ...FAILED: not ready
Trying mode: FBUS, NCK lock 4(IMSI) ...FAILED: not ready
Trying mode: FBUS, NCK lock 3(GID2) ...FAILED: not ready
Trying mode: FBUS, NCK lock 2(GID1) ...FAILED: not ready
Trying mode: FBUS, NCK lock 1(MCCMNC) ...FAILED: not ready

Reading Simlock info ...
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

pls help solution

thanks................

05-19-2012, 00:09	#14 (permalink)
sriharigold Major Poster Join Date: Jul 2009 Location: coimbatore Posts: 47 Member: 1081243 Status: Offline Thanks Meter: 4	E63 is sim card not valid BUS CHECK report : MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C0854874 Using device: HTI, FW ver: 00.50, SN: 00002F4F Connection status: OHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385 Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012) CMT Data : SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15] EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 1E700001F29E00528C772B2C56494F5FC5BE2655 ASIC MODE ID: 00 ROOT KEY HASH: C70CB07324056BC66A824347F40DB2D5 ROM ID: 4B9B75103E691FF8 SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.50.0 revision: 2.0 size: 0x3B80 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105 eBB5ProtocolType: NEW TransmissionMode: DDR&TX2 Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT Storage2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,NOR, asic:CMT Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT Storage4: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT Suggested algorithm: XSR 1.5 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.50.0 revision: 2.0 size: 0x8B45D Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105 TransmissionMode: DDR&TX2 FUR: Adding Asic CMT as client OK CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6 Original Imei: 35339704926917 Original Product code: 0592129 Bluetooth ID: E0A6702DF531 SIMLOCK PA identifier: [0] PA_SL2 [1] PA_SL3 Phone type: RM-437 (Nokia E63) SW version: V ICPR71_09w47.11 14-02-11 RM-437 (c) Nokia Imei plain: 35339704926917-1 Product code: 0568890 Battery voltage: 4878 mV, current: 48 mA Language Pack: - not available. SLPA ver[2]: PA_SL2 (15 digit NCK) SIMLOCK invalid! SUPERDONGLE_KEY seems to be valid CMLA_KEY seems to be valid WMDRM_PD seems to be valid SECURITY_TEST passed SIMLOCK_DATA corrupted! SIMLOCK_DATA corrupted! Simlock/unlock by code Report: SIMLOCK_DATA corrupted! SIMLOCK_DATA corrupted! Backup already exist. MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C0854874 Using device: HTI, FW ver: 00.50, SN: 00002F4F Connection status: OHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385 Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012) Phone type: RM-437 (Nokia E63) SW version: V ICPR71_09w47.11 14-02-11 RM-437 (c) Nokia ApeCoreSw: 510.21.010 Using cached productData. PUBLIC ID: 1E700001F29E00528C772B2C56494F5FC5BE2655 PRIVATE ID: 9CDA8A05F3D34211A7BEF5545DF7950010DD3345 #pw+ 228989176665992 +1 # #pw+ 245495915041360 +2 # #pw+ 613444246987718 +3 # #pw+ 011592630632757 +4 # #pw+ 775605730295371 +5 # #pw+ 750149392366998 +6 # #pw+ 989059933218887 +7 # Sending NCK code ... Trying mode: FBUS, NCK lock 7(ALL) ...FAILED: not ready Trying mode: FBUS, NCK lock 6(MCCMNC+GID1+GID2) ...FAILED: not ready Trying mode: FBUS, NCK lock 5(MCCMNC+GID1) ...FAILED: not ready Trying mode: FBUS, NCK lock 4(IMSI) ...FAILED: not ready Trying mode: FBUS, NCK lock 3(GID2) ...FAILED: not ready Trying mode: FBUS, NCK lock 2(GID1) ...FAILED: not ready Trying mode: FBUS, NCK lock 1(MCCMNC) ...FAILED: not ready Reading Simlock info ... SIMLOCK_DATA corrupted! SIMLOCK_DATA corrupted! pls help solution thanks................