| Fly E175
Volcano Updated: 2012-05-19
Connecting...
Connection successful,connected state!
Version: V3.8
SN:081-120-218
Port:COM3
Available Ports:COM1 COM3 COM4 COM8
Detection initiated, connect the phone and power on it...
Vcc: 9
Gnd: 1 2 7
RX: 3, TX: 5
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
Boot downloading complete!
Flash ID: 00AD0076
Flash Type: NAND_HY27XS08121M
Chip Capacity: 0x4000000(64MB)
Mobile phone software version for:W16701Z34M0A1.0T39D0413
Baud adjust...complete.
Read phone information success.
Detection initiated, connect the phone and power on it...
Vcc: 9
Gnd: 1 2
RX: 3, TX: 5
Waiting for phone's response,please press Power on/off button..
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
Boot downloading complete!
Flash ID: 00AD0076
Flash Type: NAND_HY27XS08121M
Chip Capacity: 0x4000000(64MB)
Mobile phone software version for:W16701Z34M0A1.0T39D0413
Baud adjust...complete.
Flash reading complete!
Spend time: 910.7 s
usercode:0000
[Privacy Lock]80701
[Privacy Lock]01645
[Privacy Lock]01582
[Privacy Lock]08071
[Privacy Lock]03283
The data has been saved in C:\Documents and Settings\Admin\Рабочий стол\WINGPLUS35_09A_BOOTLOADER_V005_MT6235B_W16701 Z34M0A1_0T39D0413.bV005, size: 66 M.
Detection initiated, connect the phone and power on it...
Vcc: 9
Gnd: 1 2
Waiting for phone's response,please press Power on/off button..
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
IF Software stop here. you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start, then release power button, when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Detection initiated, connect the phone and power on it...
Vcc: 9
Gnd: 1 2 7
RX: 3, TX: 5
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
IF Software stop here. you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start, then release power button, when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Detection initiated, connect the phone and power on it...
Vcc: 9
Gnd: 1 2
Waiting for phone's response,please press Power on/off button.
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
Boot downloading complete!
Flash ID: 00AD0076
Flash Type: NAND_HY27XS08121M
Chip Capacity: 0x4000000(64MB)
Mobile phone software version for:W16701Z34M0A1.0T39D0413
Baud adjust...complete.
Format range: Start Address: 0x2000000,Format Length :0x2000000
>>Flash erasing complete! |