GSM-Forum - View Single Post - RESET LCD “free with PBTOOL" WITHOUT CHANGE OS & LOST DATA

mr.omphonx · 06-06-2012, 05:20

Step workmanship Reset / Auto LCD if you want the data is not lost and OS remain:

A. Check version of "SFI / kernel" contained on the device, to ensure we have the same file.
2. Set to normal mode / patch SFI - with files from support auto lcd here, finish.
3. Set to normal mode / patch SFI - with the file "SFI / kernel" in accordance with the version before the patch, Done,
lcd auto - with the version and data as well as 3rd party app is the same.

Check the BB OS versions prior to the reset LCD

And make sure you have the OS / Firmware versions of the same with the os on the device before the reset lcd..

Perform Reset LCD with insert / patch file Auto / Reset the LCD
use the button "Set Normal Mode" ---> select the file Auto LCD ---> Open ...
wait until the finish..

Process Auto / Reset the LCD finish.
The next step Write / Flash with SFI / Kernel
according to earlier versions before the Auto / Reset the LCD,
"place" SFI / The kernel is the OS / Firmware BlackBerry

Wait until the finish ---> done, with the BB as the initial conditions, data and OS remain.

[/QUOTE]

06-06-2012, 05:20	#2 (permalink)
mr.omphonx No Life Poster Join Date: Feb 2008 Location: KABUPATEN SLEMAN Posts: 2,237 Member: 714648 Status: Offline Sonork: 1609640 Thanks Meter: 931	Step workmanship Reset / Auto LCD if you want the data is not lost and OS remain: A. Check version of "SFI / kernel" contained on the device, to ensure we have the same file. 2. Set to normal mode / patch SFI - with files from support auto lcd here, finish. 3. Set to normal mode / patch SFI - with the file "SFI / kernel" in accordance with the version before the patch, Done, lcd auto - with the version and data as well as 3rd party app is the same. Check the BB OS versions prior to the reset LCD And make sure you have the OS / Firmware versions of the same with the os on the device before the reset lcd.. Perform Reset LCD with insert / patch file Auto / Reset the LCD use the button "Set Normal Mode" ---> select the file Auto LCD ---> Open ... wait until the finish.. Process Auto / Reset the LCD finish. The next step Write / Flash with SFI / Kernel according to earlier versions before the Auto / Reset the LCD, "place" SFI / The kernel is the OS / Firmware BlackBerry *Wait until the finish ---> done, with the BB as the initial conditions, data and OS remain.* [/QUOTE]