Originally Posted by flyhighone  This has happened with Nokia N8 and C7. I try it to flash and have this error :
This is for N8 but same on C7 (USB mode)
APE Boot skipped on user request
Restarting MCU...
[Nokia N8-00 USB Phonet]: Port opened OK!
[Nokia N8-00 USB Phonet]: Port opened OK!
MCU Version V 92_11w25.1
MCU Date 01-07-11
Product RM-596 (Nokia N8)
Manufacturer (c) Nokia
IMEI 355361041034130
Mastercode 524337323
IMEI Spare 3A55630114301403
IMEI SV 3355630114301413F8000000
PSN 0
Product Code 059C073
PSD 0000000000000000
LPSN 0
WLAN MAC C8DF7C7F86E9
APE SW 022.014
APE Variant 022.014022.014.11.01022.014.208.08
APE Test 0.148
APE HW 256
APE ADSP 256
APE BT HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
RETU 35
TAHVO 00
AHNE 11
RFIC |Alli_4.3.4
DSP 92_11w25
Simlock Server SIMLOCK SERVER
Simlock Key 2140700000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 21407F
Simlock [2,1] State: OPENED Type: MCC-MNC Data: 21402F
Simlock NCK #pw+7F€m60925193468+1#
Auto Selecting Flash Files on User Request...
[Nokia N8-00 USB Phonet]: Port opened OK!
Product Code: 059C073
This is Valid BB5 Product
Variant found for readen Product Data!
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-596_022.014_79.92_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia N8-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 11300114CCA40344FF0E7DB0A345C2534F0BE7D9
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
RM-596_022.014_79.92_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.48.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC005000000031, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0050 (Samsung), Size: 512MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.48.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x00DC0000-0x0E97FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.311s
Processing Flash Image Failed -> Group Erase failed
Failed to Process all Image files -> Failed to process RM-596_022.014_79.92_prd.core.fpsx
Then I flashed ok with Phoenix2012 always USB...and all ok...phones in normal mode.
Another problems : I save RPL of N8 RM-596_355361041034130_6112012_24911 PM.SecurityBlock.PM 17k
but when I write back rpls I have no IMEI (?1234...)
How is this possible? |