View Single Post
Old 06-13-2012, 05:37   #4 (permalink)
parsamyan
Junior Member
 
Join Date: Jul 2007
Posts: 29
Member: 541361
Status: Offline
Thanks Meter: 0
module v4.31
Device: _Autodetect MT6250-6253 etc.
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1108.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6250:CA02:0100
status: FF
bbchip bl ver: FE
NOR flash id[0000]: 0000:000000000000 [AMD] AM29DL323D
chip size: 0Mb
otp status/size: S_DONE/00000000
NAND flash id[0000]: 0000:000000000000 [SAMSUNG] K9F5608Q0C
chip size: 0Mb
page/spare size: 0000/0000
pages per block: 0000
bits i/o: 00
address cycles: 00
internal RAM size: 00000000
external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000
error: can not boot device: 0C0B:S_DA_UNSUPPORTED_BBCHIP
error: last error: 0C0B:S_DA_UNSUPPORTED_BBCHIP
Disconnect...
done
Finished, time used: 12 sec
Remove/Install battery now !
  Reply With Quote
 
Page generated in 0.07153 seconds with 7 queries