[aZimBahar]

Samsung e2530 successfully flash done with flasher .

Download mode- press * then connect usb .

here driver & flasher
flashtool_e2_rou.zip - 4shared.com - online file sharing and storage - download


Gide here for flash .

• open FlashTool_E2
• add bin file
• add cds file
• add dffs file
• add psi file
• now mark {starup in normal mode }
• select erase while flash before download
• click next
• now click start usb1
• connect phone with boot mode

here done log . . .

Device synchronized.
Injecting EBL
Boot-loader is active
EBL version: xmm2130_JH1_512_128_10.2_M1S1 10..2
Boot mode is: BB
Using: Faster CRC, Writing all blocks
Package length is 2048 - protocol: 1.16
Baud rate set to 921600
Get flash id.
CFI stage 1
Flash ID is: 88810089
CFI stage 2
Boot process finished

Start downloading item 'CODE:catfish.fls'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530XXKE3_bin.fls''.
Erasing all flash memory
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
WARNING: Target EBL does not support NVM handling
Sending end-pack.
Checksum OK (0x1DC2)
Verify OK
Process time was 5 min 10 sec.

Start downloading item 'CODE:catfish.fls'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530XXKE3_cds.fls''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
WARNING: Target EBL does not support NVM handling
Sending end-pack.
Checksum OK (0x2B38)
Verify OK
Process time was 9.6 sec.

Start downloading item 'CUST:temp_GT-E2530_OXA.dffs'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530OXAKD2.dffs''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Verify OK
Process time was 1 min 21 sec.

Start downloading item 'BOOT CORE SLB:dwdtoolsrc/bootcore/make/.output/XMM6180_EHS2AGR_CATFISH_NOR_IVY/fls/psi_flash.fls'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530XXKE3_psi_flash. fls''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xFE89)
Verify OK
Process time was 562 msec.

Total time was 6 min 44 sec.
Channel 1 is succesfully closed.

If your computer does not detect your phone:

1. Run flashtool E2
2. connect phone to computer WITHOUT battery
3. insert the charged battery to phone