| Volcano Updated: 2012-06-16
Connecting...
Connection successful,connected state!
Version: V3.8
SN:081-120-218
Port:COM3
Available Ports:COM1 COM3 COM5
Detection initiated, connect the phone and power on it...
Vcc: 15 16
Gnd: 1 2 3
RX: 8, TX: 10
Waiting for phone's response,please press Power on/off button.
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
IF Software stop here. you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start, then release power button, when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Detection initiated, connect the phone and power on it...
Vcc: 15 16
Gnd: 1 2 3
RX: 8, TX: 10
Waiting for phone's response,please press Power on/off button.
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
IF Software stop here. you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start, then release power button, when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Detection initiated, connect the phone and power on it...
Vcc: 15 16
Gnd: 1 2 3
RX: 8, TX: 10
Waiting for phone's response,please press Power on/off button.
IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Detection initiated, connect the phone and power on it...
Vcc: 15 16
Gnd: 1 2 3
RX: 8, TX: 10
Waiting for phone's response,please press Power on/off button
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
Boot downloading complete!
Flash ID: 002C00A1
Flash Type: NAND_MT29F1G08ABB
Chip Capacity: 0x8000000(128MB)
Mobile phone software version for:E709C.GSW.CDMA.WIFI.U3.01.1
Baud adjust...complete.
Read phone information success.
Detection initiated, connect the phone and power on it...
Vcc: 15 16
Gnd: 1 2 3
RX: 8, TX: 10
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
Boot downloading complete!
Flash ID: 002C00A1
Flash Type: NAND_MT29F1G08ABB
Chip Capacity: 0x8000000(128MB)
Mobile phone software version for:E709C.GSW.CDMA.WIFI.U3.01.1
Baud adjust...complete.
Flash reading complete!
Spend time: 1821.0 s
usercode:1122
The data has been saved in F:\VOLC\flash\readed\Iphone\E709C_BOOTLOADER_V005_ MT6235B_01_1.bin, size: 132 M.
Detection initiated, connect the phone and power on it...
Vcc: 15 16
Gnd: 1 2 3
Waiting for phone's response,please press Power on/off button.
Connecting...
Hardware version:8A04
Software version:8A01
CPU TYPE:6235
Internal version:0000
Boot downloading complete!
Flash ID: 002C00A1
Flash Type: NAND_MT29F1G08ABB
Chip Capacity: 0x8000000(128MB)
Mobile phone software version for:E709C.GSW.CDMA.WIFI.U3.01.1
Baud adjust...complete.
Format range: Start Address: 0x3000000,Format Length :0x5000000
>>Flash erasing complete! |