i m flashing w550 but in the end software giving error pls
suggest
thanks
4SE - tool 1.8.8 (S/N:000000000***)
Selected model: W550
Selected operation: Flash
Selected interface: UART (BOOTROM)
Remove battery, wait a few seconds and insert it back
Connect cable and press "Power" button shortly
Connected to COM1
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Sending Preloader...OK
Starting GDFS service...OK
Reading GDFS security data...OK
Chip
B2010 Model:W550i IMEI:35744300-792913-7 CID:49 Domain:BROWN
OTP LOCKED:1 CID:49 PAF:1
Uploading logic DB2010:
Detecting flash type...OK
ID: 200D (ST)
Chip: ST Tyax 256 Mbit NOR (top boot)
Logical address: 0x44000000
Size: 32 Mb
Shutting down device...OK
Remove battery, wait a few seconds and insert it back
Connect cable and press "Power" button shortly
Connected to COM1
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Uploading logic DB2010:
Sending ProductionLoader...OK
Writing EROM...OK
W550i CID49 Red (R4AB048 | CDA102415/57) OSKAR, CZECH REP
Flashing 6781734_0108D32F5260.SOFTWARE (346 blocks)...OK
Flashing 6787608_010697917988.SOFTWARE (311 blocks)...OK
Flashing 10786149_0109F39F0350.SOFTWARE (9 blocks)...
Failed to send VERIFY_SIGNED_HEADER
STOPPED [719sec]