nokia 302 only vibrate while i try to flash with version rm813__14.78.mcusw at the end it give me error of downgrade though i am using latest version firmware
card found: S/N 1178:0118
registered to: javeedpco
Connect phone on selected interface...
Core : v1.53 , FlashEngine : v1.9
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm813__14.78.mcusw
PPM : rm813__14.78.ppm_d2
CNT : rm813__14.78.image_d2_059L245
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 20420000FFFB3C40141E611C5FD1DE3F0C9CCF8A
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 05BDE0ECC36CDEAA016A0565CB6BAE0B1585232E
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358629041973375
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\358629041973375_CR T_2nd.rpl
===Flashing [MCU]===
Erase : Processing rm813__14.78.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm813__14.78.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 274 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [PPM]===
Erase : Processing rm813__14.78.ppm_d2
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm813__14.78.ppm_d2
Total writen 53 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [CNT]===
Erase : Processing rm813__14.78.image_d2_059L245
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm813__14.78.image_d2_059L245
Total writen 215 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:14
Reboot phone now...
- > AfterFlash Failed!
Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
Elapsed: 00:02:41
Connect phone on selected interface...
what is the solution plss help me expert????