[Parvez.Alom+H]

Originally Posted by amit_gsm

Try This Hope Ur Problem Will Solved

navifirmplus_1.7.zip

Please flash with latest version, your set will be ok.Good luck.

I Chang flash file and download navifirmplus_1.7.zip but same problem

Number of Image Files: 1

Processing Image File :
DFL61_HARMATTAN_40.2012.21-3.335.1_PR_LEGACY_335_ARM_RM-696_PRD_signed.bin
CMT Type : MAEMO/MEEGO

C:\AdvanceBox Turbo Flasher\Logs\flasher.exe
-F DFL61_HARMATTAN_40.2012.21-3.335.1_PR_LEGACY_335_ARM_RM-696_PRD_signed.bin
C:\Documents and Settings\Parvez.Alam\My Documents\RM-696\
================================================== ====
================================================== ====
BB5 MEEGO / HARMATTAN FLASHER
================================================== ====
================================================== ====

1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port

TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
================================================== ====
================================================== ====

Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending PRIMARY-BOOT: SUCCESSFUL!
Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending SECONDARY-BOOT: SUCCESSFUL!

================================================== ====
SECURE USER DATA ERASING IN PROGRESS
================================================== ====
Secure Data Erasing takes about 15 MINUTES...
DO NOT DISCONNECT THE PHONE!!! JUST WAIT...

Estimated time to Finish Erasing: 18:40:40 (24-h Time Format)
================================================== ====

Battery Voltage Test: PASSED

Ready to Flash Images to Device...
=========================================
Processing Image: cert-sw
Processing Image: cmt-2nd
Processing Image: cmt-algo
Processing Image: cmt-mcusw
Processing Image: xloader
Processing Image: secondary
Processing Image: kernel
Processing Image: rootfs
=========================================
All Images were Succssfully Uploaded!
Software Update Done

[]: Found 1 active devices.
[Nokia N900 USB Phonet]: Opening Connection
[Nokia N900 USB Phonet]: Port opened OK!
Rebooting Phone...

Total Flashing Time (Erase + Flashing) : 00:17:25
(Booting time is NOT Included)



Phone is not Connected OR it is not in the
Required Mode...
Reboot the Phone and Enable "PC Suite" Mode


Life timer data is not yet used...
Life timer: ----:--

FACTORY SET TO : Full Factory Set
FAILED
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK