i9020T Hi everyone.
Thanks for your continuos support to these models:
I have tested the first 4 faulties i9020T.
The results are this:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9020T V1.0.4787.59284]
Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Detected an Initialized FLASH2 Chip, ID: 0x0002/0x0100 (SEM16G, 0x0003B5400000 Bytes = 14.83 GB)
Detected an Initialized FLASH3 Chip, ID: 0x0002/0x0100 (SEM16G, 0x000000100000 Bytes = 1.00 MB)
So, eMMC are OK. But no download mode.
This night I'll test 8 mainboards further.
There are a lot of work with this phone family.
I remember Dl mode is possible with I9000 Dll but we can't flash it with ODIN.
Thanks again. |