No Life Poster
Join Date: Nov 2002 Location: Lille Age: 46
Posts: 504
Member: 17451
Status: Offline
Thanks Meter: 31 | Read info Code: MCU Version V 06.65
MCU Date 01-04-09
Product RM-495 (Nokia 5130 XpressMusic)
Manufacturer (c) Nokia
IMEI 12345610654321?
IMEI Spare 1A32541660452301
IMEI SV 1332541660452331F2000000
PPM V 06.65, 01-04-09, RM-495, (c) Nokia , AE
CNT Content: ae_fr_red, V 06.65, 01-04-09, RM-495, (c) Nokia ,
PSN HML912217
Product Code 0580572
Module Code 0204024
Basic Product Code 0567773
PSD 0000000000000000
LPSN 0
RETU 16
TAHVO 22
AHNE 30
HW 1003
RFIC 06540601
DSP ICPR72_09w03
LCD SEIKO
BT 2222-143C
Failed to read info -> Failed to read SP info Analyze security + SD repair + write PM Code: Started Phone Security Analysis...
MCU Version V 06.65
MCU Date 01-04-09
Product RM-495 (Nokia 5130 XpressMusic)
Manufacturer (c) Nokia
IMEI 12345610654321?
Reading Security Block...
Security block OK and saved to "RM-495_12345610654321_10032013_020250.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --
Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)
Additionaly, Checking HWC/CCC Certs...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1DD0010F158C4950EEDB9CA0C26686B5B71965E9
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
HWC Looks OK!
CCC Looks OK!
Restarting MCU...
-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
"1DD0010F158C4950EEDB9CA0C26686B5B71965E9.C000192C" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Analyze finished!
SX4 Authorization / SD Repair Procedure Started....
"1DD0010F158C4950EEDB9CA0C26686B5B71965E9.C000192C" Exists, That is good...
MCU Version V 06.65
MCU Date 01-04-09
Product RM-495 (Nokia 5130 XpressMusic)
Manufacturer (c) Nokia
IMEI 12345610654321?
Reading Security Block...
Security block OK and saved to "RM-495_12345610654321_10032013_020323.SecurityBlock.PM"
SX4 Status: Authorized
[120,0] Written, Length: 88 bytes, Status: OK
[120,1] Written, Length: 160 bytes, Status: OK
[120,2] Written, Length: 130 bytes, Status: OK
[120,3] Written, Length: 112 bytes, Status: OK
[308,1] Written, Length: 8192 bytes, Status: Not accepted, Code: 19
Write PM Finished, Record written OK: 4, Record written NOT OK: 1 |