i have nokia c5-00.2 rm-745
when i open camra , on screen display blank for a few second and i go return to main manu.
i take full flash of cell. and after flash try to repair camra configuration, you also see below full log of my work.
bb5 best tool:
Core : v1.62 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm745_102.002_prd.core.fpsx
PPM : rm745_102.002_10.01_MEA_A_prd.rofs2.fpsx
PPM2 : rm745_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm745_102.002_U000.000_prd.uda.fpsx
APE : rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx
Check FlashFiles, Please, wait...
-> SWversion check skipped : Manual mode selected
Setting FlashMode
FlashMode set Ok
1st boot Ok, C0
CMT part info :
CMT ASICID : 000000030000022600010007600C192102031104
CMT EM0 ID : 00000C35
CMT EM1 ID : 00000C30
CMT PUB ID : 0820010FAEDE0344FE58F11E2B05C72FA5A98F95
CMT MODE ID : 00
CMT R_HASH : 916F75217F32081248B15C38DFC8E81B
CMT ROM ID : E693EF0DAC22615B
UFSx doesn't support New Protocol
- > Use USB cable for this phone ;D
Phone disconected!
Connect phone on selected interface...
Connect phone on selected interface...
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Connect phone on selected interface...
Core : v1.62 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm745_102.002_prd.core.fpsx
PPM : rm745_102.002_10.01_MEA_A_prd.rofs2.fpsx
PPM2 : rm745_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm745_102.002_U000.000_prd.uda.fpsx
APE : rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0820010FAEDE0344FE58F11E2B05C72FA5A98F95
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8
ADL: phone is in flash mode
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm745_102.002_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm745_102.002_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 413 blocks
TIME : Write time : 00:00:13
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM]===
Erase : Processing rm745_102.002_10.01_MEA_A_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm745_102.002_10.01_MEA_A_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 164 blocks
TIME : Write time : 00:00:05
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM2]===
Erase : Processing rm745_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm745_102.002_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [CNT]===
Erase : Processing rm745_102.002_U000.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04
Write : Processing rm745_102.002_U000.000_prd.uda.fpsx
Total writen 36 blocks
TIME : Write time : 00:00:04
CNT Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [APE]===
Erase : Processing rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 10 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:32
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia C5-00
Software Info: V ICPR82_11w16.3.14 16-11-12 RM-745 (c) Nokia
IMEI: 351685052703694
Ape Version: 102.002
Product code: 059F176
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:00:57
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking Camera Configuration...
Operating mode is OK, no need change...
Primary Camera #1 configuration info not exist
Secondary Camera #2 configuration info not exist
Done!
Try Read Camera Configuration to base...
Cam 1 configuration not found
Cam 2 configuration not found
Done!
Try Read Camera Configuration to base...
Cam 1 configuration not found
Cam 2 configuration not found
Done!
-------------------------------------
i also run full test of my cell
in test camra passed no hardware error.
plz help what i do more............
bundle of thanks.