GSM-Forum - View Single Post

tribycell · 04-10-2013, 18:10

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9070 V1.0.4762.51152]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x51): Communication is not established. Terminating.

04-10-2013, 18:10	#4 (permalink)
tribycell Junior Member Join Date: Jan 2010 Posts: 23 Member: 1203881 Status: Offline Thanks Meter: 5	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9070 V1.0.4762.51152] Restarting target (nRST Low then High)...OK Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x51): Communication is not established. Terminating.