View Single Post
Old 05-22-2013, 08:47   #9 (permalink)
r-jcomm
No Life Poster
 
r-jcomm's Avatar
 
Join Date: Oct 2007
Location: pakistan
Posts: 1,520
Member: 601913
Status: Offline
Sonork: 100.1597350
Thanks Meter: 658
are u ready to download nokia official firmwares

Download Official Nokia Firmware Even Without Navifirm+


Here’s a trick to download official Nokia firmware without Navifirm+
Things you need:
1. Latest version of Nokia Suite (version 2013_13_4_4 download from Nokia site)
2. usergroupsconfiguration.cfg file
You can download the ‘usergroupsconfiguration.cfg’ file from HERE
Alternate LINK to both files.
Installation:
1. First install Nokia Suite. Do not run after the installation is finished.




2. After Nokia Suite installs, copy and replace the usergroupsconfiguration.cfg file to C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0 if you’re running a 64-bit version of Windows. Or C:\Program Files\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0 if on 32-bit.

Running Nokia Suite and Downloading the firmware:
1. Open Nokia Suite. And select ‘Product Support Tool For Store 5.0′




2. When prompted, select ‘CareSuite External’ then hit ‘Sign-in’ button.




3. From the Menu, select Tools, then ‘Firmware Download’




4. Now enter the product code of your device, hit ‘Check Online’ button, to check the latest firmware version of your product code.




5. Then ‘tick’ ‘Optional Content Files and ‘Download’ to save your firmware.

6. Wait a few minutes for your files to download
7. You may now manually flash your Nokia device with the firmware you just downloaded.
TIP:
- Your firmware should be stored in the C:\ProgramData\Nokia\Packages\Products folder of your hard drive.
- If you need to download a different firmware version for the same product code, I suggest you wait for your first download to finish, save all the downloaded files in a marked folder, then proceed with your next download.
- Partial List of Nokia Lumia product codes.
WARNING & DISCLAIMER: This process is for experimental purposes ONLY. I will not be responsible for any damage your device may incur during the manual flashing. PROCEED AT YOUR OWN RISK.


[SIZE="5"](dont forget to press thanks )

br
S.M.JUNAID[/SIZE]
  Reply With Quote
The Following 11 Users Say Thank You to r-jcomm For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.09408 seconds with 7 queries