[XxTQxX]

================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 2.7-2.8V, 2.6-2.7V, 2.5-2.6V
2.4-2.5V, 2.3-2.4V, 2.2-2.3V, 2.1-2.2V, 2.0-2.1V
1.9-2.0V

eMMC Boot Information
BOOT PARTITION : USER AREA
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT: DISABLED
PWR_BOOT_CFG_PROT : DISABLED
eMMC FirmW UPDATE : DISABLED

Lumia 800/800C Detected

eMMC Device Information
Manufacturer ID: 90
Device Type : Embedded BGA
Application ID : 4A
Product Name : HYNIX
Product Rev : 5.12
Product SN : 001A60F2
Manufactured : January 2011

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 300 ns
TRANS_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO


Dumping Custom Region
Please wait for some time...
Partition Selected: USER AREA
(eMMC Clock 15000000 Hz)
Patch Bit Found...
Total Patch Bits Found: 1
Patching AMSS...
Patch OK!

SP Unlock Done!

PIN: 00000000
PUK: 0000000000

Total Elapsed Time 00:00:37


Thank you for help