GSM-Forum - View Single Post - Cherry Mobile Flare S100

Advance-Box · 09-04-2013, 16:39

1. If eMMC is not Damaged, then direct connection to eMMC via TP should work. If it does not work for you, then you must make it work by check type of cable used, soldering etc.

2. If eMMC is Damaged, nothing you can do but replace eMMC. As promised I will give free samples once my eMMCs arrive. I will also pre-program it with a working JB image so that all you need to do is change the IMEI after you replace the eMMC on the PCB.

3. If you use my full Dump for eMMC from here:
http://www.4shared.com/rar/jKrvD-8T/...JBv006045.html

You will not have any problems with partitions or "reduced size" in internal storage.
You can even write this dump on a blank eMMC and it will work 100% after. (Of course please do change the IMEI 1 and IMEI 2 because sooner or later the IMEI inside my dump will be blocklisted by NTC hehehe).

B.R.

09-04-2013, 16:39	#40 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	1. If eMMC is not Damaged, then direct connection to eMMC via TP should work. If it does not work for you, then you must make it work by check type of cable used, soldering etc. 2. If eMMC is Damaged, nothing you can do but replace eMMC. As promised I will give free samples once my eMMCs arrive. I will also pre-program it with a working JB image so that all you need to do is change the IMEI after you replace the eMMC on the PCB. 3. If you use my full Dump for eMMC from here: http://www.4shared.com/rar/jKrvD-8T/...JBv006045.html You will not have any problems with partitions or "reduced size" in internal storage. You can even write this dump on a blank eMMC and it will work 100% after. (Of course please do change the IMEI 1 and IMEI 2 because sooner or later the IMEI inside my dump will be blocklisted by NTC hehehe). B.R.