Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.71.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit
http://easy-jtag.com
Initialising: Samsung GT-S7562 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: ********** ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(in download mode shows product {blank}