ATF First In The World Nokia 515 Full Flashing !!! Here is the Screenshot: 
Here is Flashing Logs : Code:
Number of Image Files: 3
Processing Image File :
rm952__05.08.mcusw
Processing Image File :
rm952__05.08.ppm_m4
Processing Image File :
rm952__05.08.image_m4_059T0J1
AUTO SELECTED DEAD USB FLASHING...
If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, and 3...
1. Remove USB Cable and Battery...
2. Connect USB Cable.
3. Connect Battery.
***** IF PHONE STARTS CHARGING OR DOES NOT BOOT *****
******* REMOVE BATTERY AND PUT IT BACK AGAIN. *******
======================================================
Infineon Boot: F01650A9070100030101E010180900048950495671B5FFFF
<<<< Connect Battery Now >>>>
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Flash Chip Manufacturer: STMicroelectronics
Flash Boot Successful...
Unique Data: E010180900048950-495671B5
Original Product Code: 059T0J1
Reading : CCC... OK!
Reading : HWC... OK!
Reading : NPC... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Turbo Flasher\Nokia\Backup\357887051115987\357887051115987_62307.rpl
Current File : rm952__05.08.mcusw
Number of Images: 8
psi_flash_unsigned.fls
slb_signed.fls
main_toc_signed.fls
rm952__05.08.mcusw_signed_mcusw.fls
swap_signed.fls s
dynsw.fls
aeneas_signed.fls s
fota_signed.fls s
Processing Data Block 0x00
Erase Block: 0x00090000~0x000A0FAE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x01
Erase Block: 0x60000000~0x6003FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x02
Erase Block: 0x60040000~0x600403FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x03
Erase Block: 0x62E00000~0x63D0CB66
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xFFF00000~0xFFF7FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Processing Data Block 0x04
Erase Block: 0x80000000~0x80C2856E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x05
Erase Block: 0x62080000~0x620C3FFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x06
Erase Block: 0x63F79C00~0x63FC046E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x07
Erase Block: 0x61F00004~0x6204950A
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Current File : rm952__05.08.ppm_m4
Number of Images: 1
package_m4.ppm_ebl_psi.fls
Processing Data Block 0x00
Erase Block: 0x80F00000~0x815CEBB2
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Current File : rm952__05.08.image_m4_059T0J1
Number of Images: 1
package_m4_059T0J1.image.fls
Processing Data Block 0x00
Erase Block: 0xA1000000~0xA30213FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xAE000000~0xAE2FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Total Flashing Time (Erase + Flashing) : 00:00:14
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 150 seconds)
Scanning USB Ports...
================================================
Basic Phone Information
================================================
Product Serial Number: 271EC9FBH
Product Code : 059T0J1
Module Code : 0205689
Basic Production Code: 059S4T1
Long Production SN : 0
PPM SW Version : V 05.08 10-08-13 RM-952 (c) Nokia M4
BT MCM Version : 19e2-4702G12
ADSP Version : PMU_MAXIM8939B
MCU SW Version : V 05.08 10-08-13 RM-952 (c) Nokia
HW Version : 1000
UEM Version : 18
UPP Version : MFR:0x20,DEV:0x40,REV:0x131
RFIC Version : 152
LCD Version : TPO
Camera : 0103B904005005
Content Pack Version : Content: m4_059T0J1 V 05.08 10-08-13 RM-952 (c) Nokia
AHNE Version : 13
RETU Version : PMU_MAXIM8939B
Bluetooth ID : DC:3E:F8:C9:EE:8F
CS Type : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA VIII
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 800000000004000B
ASIC : 11
PROVIDER : Default Test Operator
LOCK COUNTERS: KEYPRESS 0/3, FBUS 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK_TYPE : PA_SIMLOC30 (20-digit NCK)
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : 12345
PHONE_MODE : TEST
================================================
Dynamic Camera Configuration
================================================
DCC ID : 0103B904
DCC Ver: 005005
Status : OK
======================================================
Selected VPL File:
RM952_059T0J1_05.08_020.vpl
======================================================
Variant Details : RM-952 MEA_M4_BLACK_ARABIC_BH
Software Version : 05.08
Product Type : RM-952
Product Code : 059T0J1
Variant Version : 020
FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK
Life timer data is not yet used...
Life timer: ----:-- Here is My Phone.. my ATF Behind Phone's Box :P
BR,
WAJID