| Full I9260 CPU: 88100001 Flash: NAND_H8BCS0UN0MCR
 Code: Chip=SpreadTrum
Action=ReadFlash
FlashType=Nand
boot=8810
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=USB
FlashFile=E:\damp spread avator\I9260\I9260
Comport=COM14
Baudrate=921600
CPU_Type=88100001
CPU_ID=88100001
NOR_ID=
NOR_Size=
NOR_Name=
NOR_DieCnt=
NAND_ID=00AD00BCFFFFFFFF
NAND_Size=512MB
NAND_Name=NAND_H8BCS0UN0MCR
Initializing...
DA_LIB_VER_5.6.1.1
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810000100005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: 88100001 Flash: NAND_H8BCS0UN0MCR
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Save as: E:\damp spread avator\I9260\I9260.cmz
All Done. DOWNLOAD FULL |