View Single Post
Old 10-23-2013, 01:15   #108 (permalink)
cellcarcol
No Life Poster
 
cellcarcol's Avatar
 
Join Date: Apr 2005
Location: America
Posts: 1,821
Member: 138781
Status: Offline
Thanks Meter: 850
flashing samsung b3210

flash used B3210JBIL1_OJBIL1


Region: 1, 0x20000000-0x20000063, Length: 100 bytes
Region: 2, 0x2000C000-0x20011457, Length: 21592 bytes
Region: 3, 0x20016000-0x2001C59B, Length: 26012 bytes
Region: 4, 0x2001E000-0x2001E0B3, Length: 180 bytes
Region: 5, 0x2003803C-0x20056A57, Length: 125468 bytes
Region: 6, 0x20080000-0x20080037, Length: 56 bytes
Region: 7, 0x20080138-0x200849A3, Length: 18540 bytes
Region: 8, 0x200A0000-0x201B5697, Length: 1136280 bytes
Region: 9, 0x20300000-0x222380A7, Length: 32735400 bytes
1st:
1st:
1st Boot Ok, McuId: 00050015, Rom: 00050015, 13-1.2 (Vision X115E)
2nd Boot Ok, McuId: 00050015, Rom: 00050015, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s06_t.sre
Flash1: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Flash2: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Baud Rate Set: 460800 bps
MCU File: B3210JBIL1.s3
Flashing NOR part...
Write Done, 34063708 byte(s), Time: 20:52
CTS File: B3210OJBIL1.csc
FS Formated (FDI)
FS Mounted (FDI)
Files Count: 271
FS Unmounted
FS Write Done, 11211111 byte(s), Time: 11:42
MSL3 CODE Mismatch, use [Repair MSL] not need to Write E2P or MCU !
S/N : RGBB787652

Using MSL S/N: RGBB787652
1st Boot Ok, McuId: 00050015, Rom: 00050015, 13-1.2 (Vision X115E)
2nd Boot Ok, McuId: 00050015, Rom: 00050015, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s06_t.sre
Flash1: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Flash2: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Baud Rate Set: 460800 bps
Read Done, St: 0x23FC0000, 262144 byte(s), Time: 00:09, 0
Flashing NOR part...
Write Done, 262160 byte(s), Time: 00:09
  Reply With Quote
 
Page generated in 0.13557 seconds with 7 queries