GSM-Forum - View Single Post - plz tp lumia 520 rm-914

5970 · 10-24-2013, 11:12

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

ERROR: Phone WAS NOT Detected! (CMD1)
Check your Test Point Soldering!

BOOT Images Written Successfully!

Be sure to desolder all the wires properly
before you try to flash the phone (if needed).

Total Elapsed Time 00:00:22

10-24-2013, 11:12	#1 (permalink)
5970 No Life Poster Join Date: May 2011 Location: bizerte tunisie Age: 38 Posts: 675 Member: 1578225 Status: Offline Thanks Meter: 17	plz tp lumia 520 rm-914 1. DO NOT USE THE PHONE"S BATTERY 2. Connect the Soldered TP Connections to ATF Box 3. Disconnect the USB Cable and Wait until the the ATF Software will tell you to Connect the USB. ERROR: Phone WAS NOT Detected! (CMD1) Check your Test Point Soldering! BOOT Images Written Successfully! Be sure to desolder all the wires properly before you try to flash the phone (if needed). Total Elapsed Time 00:00:22