GSM-Forum - View Single Post

nilan · 11-01-2013, 15:38

how to root & repair imei in n7100 copy

Welcome to use miracle box(World's First Fuzzy Logic Based Tool)
SoftWare Version 1.63 Update:13-11-01
Firmware Version:1.10
Connected OK.
Connecting Internet...
You use Latest Miracte Software 1.63
Fuzzy Logic Method is very safe and reliable !
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
1. Phone switch on with battery
2. Need to open the USB debugging
3. Setting defined or line to phone
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
SPDScaning Pinouts,Need not press Power-Key...
<<
Phone contact with The Cable bad. Scanned Failure
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Connecting to Phone,Wait..ok
Hardware:mtk6577
Board:sp6820gb_s510v11
CPU ABI:armeabi-v7a
Manufacturer:SND
Model:N7100
Android Ver:4.1.1
bootloader ver:unknown
User:BuildUser
Baseband ver

M_BASE_12A_W12.43|sc6820_modem|11-02-2012 17:53:08
Build number:6.0.B.3.162
IMEI1: 355889565522525
Root: Not Root
Done
WARNING : IMEI CHANGE IS ILLEGAL
Connecting to Phone,Wait..
Repair IMEI...
Connection Done
CPU: mtk6577
MODEL: N7100
VSN: 4.1.1
Wait ...
WRITING IMEI1 & IMEI2.. /data/l

Done
Connecting to Phone,Wait..
Abort by User
1. Phone switch on with battery
2. Need to open the USB debugging
3. Setting defined or line to phone
SPDScaning Pinouts,Need not press Power-Key...
<<
Phone contact with The Cable bad. Scanned Failure
Connecting to Phone,Wait..ok
checking info...
Model:N7100
Android Ver:4.1.1
Connecting to Phone,Wait..ok
ROOT Fail!
Connecting to Phone,Wait..ok
checking info...
Model:N7100
Android Ver:4.1.1
Connecting to Phone,Wait..ok
ROOT Fail!
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
>>3.Pulled low may not, manually set.

11-01-2013, 15:38	#1 (permalink)
nilan No Life Poster Join Date: Apr 2005 Age: 57 Posts: 1,569 Member: 137980 Status: Offline Thanks Meter: 168	how to root & repair imei in n7100 copy how to root & repair imei in n7100 copy Welcome to use miracle box(World's First Fuzzy Logic Based Tool) SoftWare Version 1.63 Update:13-11-01 Firmware Version:1.10 Connected OK. Connecting Internet... You use Latest Miracte Software 1.63 Fuzzy Logic Method is very safe and reliable ! 1.Phone Power off 2.Add SU, is for not normally Root, you can choose this 1. Phone switch on with battery 2. Need to open the USB debugging 3. Setting defined or line to phone 1.Phone Power off 2.Add SU, is for not normally Root, you can choose this SPDScaning Pinouts,Need not press Power-Key... << Phone contact with The Cable bad. Scanned Failure Scanning USB Serial port... count:=0_ None SU2Serial Port. 1.Please Make sure install the driver 2.The Phone may be required to read and write keys 3.Pulled low may not, manually set. Scanning USB Serial port... count:=0_ None SU2Serial Port. 1.Please Make sure install the driver 2.The Phone may be required to read and write keys 3.Pulled low may not, manually set. Connecting to Phone,Wait..ok Hardware:mtk6577 Board:sp6820gb_s510v11 CPU ABI:armeabi-v7a Manufacturer:SND Model:N7100 Android Ver:4.1.1 bootloader ver:unknown User:BuildUser Baseband verM_BASE_12A_W12.43\|sc6820_modem\|11-02-2012 17:53:08 Build number:6.0.B.3.162 IMEI1: 355889565522525 Root: Not Root Done WARNING : IMEI CHANGE IS ILLEGAL Connecting to Phone,Wait.. Repair IMEI... Connection Done CPU: mtk6577 MODEL: N7100 VSN: 4.1.1 Wait ... WRITING IMEI1 & IMEI2.. /data/l Done Connecting to Phone,Wait.. Abort by User 1. Phone switch on with battery 2. Need to open the USB debugging 3. Setting defined or line to phone SPDScaning Pinouts,Need not press Power-Key... << Phone contact with The Cable bad. Scanned Failure Connecting to Phone,Wait..ok checking info... Model:N7100 Android Ver:4.1.1 Connecting to Phone,Wait..ok ROOT Fail! Connecting to Phone,Wait..ok checking info... Model:N7100 Android Ver:4.1.1 Connecting to Phone,Wait..ok ROOT Fail! 1.Phone Power off 2.Add SU, is for not normally Root, you can choose this Scanning USB Serial port... count:=0_ None SU2Serial Port. 1.Please Make sure install the driver 2.The Phone may be required to read and write keys 3.Pulled low may not, manually set. Scanning USB Serial port... count:=0_ None SU2Serial Port. 1.Please Make sure install the driver 2.The Phone may be required to read and write keys 3.Pulled low may not, manually set. Scanning USB Serial port... count:=0_ None SU2Serial Port. 1.Please Make sure install the driver 2.The Phone may be required to read and write keys >>3.Pulled low may not, manually set.