after root & repair imei all is same no imei repair
Welcome to use miracle box(World's First Fuzzy Logic Based Tool)
SoftWare Version 1.63 Update:13-11-01
Firmware Version:1.10
Connected OK.
Connecting Internet...
You use Latest Miracte Software 1.63
Fuzzy Logic Method is very safe and reliable !
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
1. Phone switch on with battery
2. Need to open the USB debugging
3. Setting defined or line to phone
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
SPDScaning Pinouts,Need not press Power-Key...
<<
Phone contact with The Cable bad. Scanned Failure
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Connecting to Phone,Wait..ok
Hardware:mtk6577
Board:sp6820gb_s510v11
CPU ABI:armeabi-v7a
Manufacturer:SND
Model:N7100
Android Ver:4.1.1
bootloader ver:unknown
User:BuildUser
Baseband ver
M_BASE_12A_W12.43|sc6820_modem|11-02-2012 17:53:08
Build number:6.0.B.3.162
IMEI1: 355889565522525
Root: Not Root
Done
WARNING : IMEI CHANGE IS ILLEGAL
Connecting to Phone,Wait..
Repair IMEI...
Connection Done
CPU: mtk6577
MODEL: N7100
VSN: 4.1.1
Wait ...
WRITING IMEI1 & IMEI2.. /data/l
Done
Connecting to Phone,Wait..
Abort by User
1. Phone switch on with battery
2. Need to open the USB debugging
3. Setting defined or line to phone
SPDScaning Pinouts,Need not press Power-Key...
<<
Phone contact with The Cable bad. Scanned Failure
Connecting to Phone,Wait..ok
checking info...
Model:N7100
Android Ver:4.1.1
Connecting to Phone,Wait..ok
ROOT Fail!
Connecting to Phone,Wait..ok
checking info...
Model:N7100
Android Ver:4.1.1
Connecting to Phone,Wait..ok
ROOT Fail!
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Scanning USB Serial port...
count:=0_
None SU2Serial Port.
1.Please Make sure install the driver
2.The Phone may be required to read and write keys
3.Pulled low may not, manually set.
Connecting to Phone,Wait..
Abort by User
MTKScaning Pinouts,Please press Power-Key...
<<....
Abort by User
Waiting for USB Port...
if Input is space, read sn
WARNING : IMEI CHANGE IS ILLEGAL
Waiting for USB Port...
none usbport, maybe driver not installed
if Input is space, read sn
WARNING : IMEI CHANGE IS ILLEGAL
Please Turn on your phone by battery before pressing START
Waiting for USB Port...
Abort by User
none usbport, maybe driver not installed
Please Turn on your phone by battery before pressing START
Waiting for USB Port...
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
3.Clear code for USB debugging can not manually open
4.With clear code function Cleared password, please recover ROOT
none usbport, maybe driver not installed
Waiting for USB Port...
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM30)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6575 SW: E201 Ver: CB00
Downloading Boot8 ...
Nand Flash Type: NOR_NEW_0071
Nand Flash Code: 009800BC(00900066)
Nand Flash Size: 0x21000000 Hex Bytes
INT/EXT RAM Size: 0xC4800+0x0
Reading ROOT DATA...5C0000_A00000
C:\Program Files\miracle box\MTK6575nandboot1311012020.img
Writing ROOT DATA...5C0000_A00000
Root OK.
total?? 1 mins31 s
if Input is space, read sn
WARNING : IMEI CHANGE IS ILLEGAL
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM30)
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM30)
Please Hold "ON" to connect with the phone...
Waiting for USB Port...
Set
Connecting AT Mode
Test Mode, Reading Information From the Phone...
W IMEI1 OK: 35525602145727-9
W IMEI2 OK: 35950200278134-4
W IMEI3 OK: 35950200278134-4
R IMEI4 OK: FFFFFFFFFFFFFF-15
if Input is space, read sn
>>WARNING : IMEI CHANGE IS ILLEGAL