i9000 repair ok
Loading repair file: 'G:\easy-jtag\9. Easy Jtag files\Samsung\GT-I9000\Repair\Samsung-GT-i9000.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9000, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.82.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit
EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9000 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: xxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC110
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing BOOT...
NAND Write OK! Elapsed time: 1.359480s (194.192 KiB/s)
NAND Writing PIT...
NAND Write OK! Elapsed time: 0.687553s (383.970 KiB/s)
NAND Writing SBL1...
NAND Write OK! Elapsed time: 9.203831s (143.419 KiB/s)
NAND Writing SBL2...
NAND Write OK! Elapsed time: 9.203832s (143.419 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 0.921946s (1145.403 KiB/s)
All Done.