EasyJtag Suite ver.: 1.0.85.0 started.
Operating system ver.: Windows 7 (build 7600).
Successefuly connected to box on COM4
Box S/N: XXXXXXXXXXXXXX, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AA01-0110 , ver: 22
Loading repair file: 'D:\Easy jtag Files\Samsung\I9020-23\Samsung GT-i9023_V1.01.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9023, Ver.: 1.01
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.85.0 started.
Operating system ver.: Windows 7 (build 7600).
For support and updates visit
EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9023 Config ver.:1.01
I/O Level set to : 2800 mV
Box S/N: 1212FC0FD35FC978 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC110
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing BOOT...
NAND Write OK! Elapsed time: 103.628906s (239.470 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 1.030274s (1024.970 KiB/s)
All Done.